Thema erstellen
Foren
Neue Beiträge
Foren durchsuchen
Aktuelles
Neue Beiträge
Neueste Aktivitäten
Blog
Anmelden
Registrieren
Aktuelles
Suche
Suche
Nur Titel durchsuchen
Von:
Neue Beiträge
Foren durchsuchen
Menü
Anmelden
Registrieren
App installieren
Installieren
Foren
Reparaturtipps weiße Ware
Reparatur Geschirrspüler
Miele G6360SCVi Slide Shutter Fault, motor not having control signal
JavaScript ist deaktiviert. Für eine bessere Darstellung aktiviere bitte JavaScript in deinem Browser, bevor du fortfährst.
Du verwendest einen veralteten Browser. Es ist möglich, dass diese oder andere Websites nicht korrekt angezeigt werden.
Du solltest ein Upgrade durchführen oder einen
alternativen Browser
verwenden.
Auf Thema antworten
Beitrag
<blockquote data-quote="eduardsik" data-source="post: 375869" data-attributes="member: 86444"><p>Hello community!</p><p></p><p>I bought a Miele G6360SCVi diswasher and found the slide shutter not working and the dishwasher not washing properly. I measured the connector on the slide shutter and not receiving the 230V, just 50V AC. When I disassembled the control panel, on the ST14 connector (related to the syncron motor and the microswitch) I found very light gray burn marks. The connector inside is clear and on the PCB no burnmarks at all. But I found a damaged IC ASC1026T (a triac) which is at some distance from the ST14 connector, so I think is not related to this fault, but very interesting, because the dishwasher is working properly, just the slide shutter not as I figured out. </p><p></p><p>The control panel has a type of ELPW 5662-K</p><p></p><p>- what controls the synchronous motor signal, what component do I check?</p><p>- What is the purpose of the defective IC?</p><p></p><p>Thanks in advance!</p><p>Eduard</p></blockquote><p></p>
[QUOTE="eduardsik, post: 375869, member: 86444"] Hello community! I bought a Miele G6360SCVi diswasher and found the slide shutter not working and the dishwasher not washing properly. I measured the connector on the slide shutter and not receiving the 230V, just 50V AC. When I disassembled the control panel, on the ST14 connector (related to the syncron motor and the microswitch) I found very light gray burn marks. The connector inside is clear and on the PCB no burnmarks at all. But I found a damaged IC ASC1026T (a triac) which is at some distance from the ST14 connector, so I think is not related to this fault, but very interesting, because the dishwasher is working properly, just the slide shutter not as I figured out. The control panel has a type of ELPW 5662-K - what controls the synchronous motor signal, what component do I check? - What is the purpose of the defective IC? Thanks in advance! Eduard [/QUOTE]
Zitate einfügen...
Authentifizierung
Welcher Monat hat immer echt weniger als 30 Tage?
Antworten
Foren
Reparaturtipps weiße Ware
Reparatur Geschirrspüler
Miele G6360SCVi Slide Shutter Fault, motor not having control signal
Oben