M
morfeus
Benutzer
- Registriert
- 16.01.2020
- Beiträge
- 3
- Punkte Reaktionen
- 0
- Wissensstand
- Bastler mit Reparaturerfahrung
Hallo,
Ich habe hier viel mehr Informationen über Grundig gefunden als in anderen Foren. Zunächst entschuldige ich mich für mein schlechtes Deutsch, aber ich musste Google verwenden.
Ich habe zwei Fernseher von grundig zu Hause. Der erste ist 40 VLE 5520 BN, Chassis TY und der zweite ist 40 VLE 4324 BF mit Chassis TT. Hier in Kroatien wird der Rundfunk ab 1.7.2020 auf DVB-T2 / HEVC umgestellt. Was ich als meine Optionen sehe, ist (in der Reihenfolge von weniger teuer zu den teuersten):
1. Digitale Decoder ablöten und durch solche ersetzen, die DVB-T2 unterstützen.
2. Ersetzen der Hauptplatine jedes Fernsehgeräts durch ein ähnliches Gerät, das jedoch einen DVB-T2-Decoder hat und das Netzteil und das LCD-Panel unterstützt.
3. Installieren Sie das CI + -Modul, das möglicherweise DVB-T2 unterstützt.
4. Kaufen Sie zwei neue Fernseher.
Welche Optionen sind möglich und was wären Ersatzkomponenten in Fall 1 und 2? Welches CI + -Modul würde für den Tash funktionieren, wenn Option 3 ausgewählt werden soll?
Vielen Danke.
Mit freundlichen Grüßen,
Gabrijel
---- English ----
Hi,
I found much more information about Grundig here than on other forums. First of all, sorry for my bad German, but I had to use google.
I have two TV from grundig at home. First is 40 VLE 5520 BN, chassis TY and second one is 40 VLE 4324 BF with Chassis TT. Here in Croatia we the broadcasting will be cwitched to DVB-T2/HEVC starting with 1.7.2020. What I see as my options is (in order from less expensive to the most expensive):
1. desolder digital decoders and replace with ones that support DVB-T2.
2. replacing main board of each TV with simmilar but that has DVB-T2 decoder and supports power supply and LCD panel.
3. install CI+ module that might add support of DVB-T2.
4. Buy two new TVs.
What options are possible and what would be replacement components in case 1 and 2? What CI+ module would work for the tash if option 3 is to be selected?
Thanks.
Kind regards,
Gabrijel
Ich habe hier viel mehr Informationen über Grundig gefunden als in anderen Foren. Zunächst entschuldige ich mich für mein schlechtes Deutsch, aber ich musste Google verwenden.
Ich habe zwei Fernseher von grundig zu Hause. Der erste ist 40 VLE 5520 BN, Chassis TY und der zweite ist 40 VLE 4324 BF mit Chassis TT. Hier in Kroatien wird der Rundfunk ab 1.7.2020 auf DVB-T2 / HEVC umgestellt. Was ich als meine Optionen sehe, ist (in der Reihenfolge von weniger teuer zu den teuersten):
1. Digitale Decoder ablöten und durch solche ersetzen, die DVB-T2 unterstützen.
2. Ersetzen der Hauptplatine jedes Fernsehgeräts durch ein ähnliches Gerät, das jedoch einen DVB-T2-Decoder hat und das Netzteil und das LCD-Panel unterstützt.
3. Installieren Sie das CI + -Modul, das möglicherweise DVB-T2 unterstützt.
4. Kaufen Sie zwei neue Fernseher.
Welche Optionen sind möglich und was wären Ersatzkomponenten in Fall 1 und 2? Welches CI + -Modul würde für den Tash funktionieren, wenn Option 3 ausgewählt werden soll?
Vielen Danke.
Mit freundlichen Grüßen,
Gabrijel
---- English ----
Hi,
I found much more information about Grundig here than on other forums. First of all, sorry for my bad German, but I had to use google.
I have two TV from grundig at home. First is 40 VLE 5520 BN, chassis TY and second one is 40 VLE 4324 BF with Chassis TT. Here in Croatia we the broadcasting will be cwitched to DVB-T2/HEVC starting with 1.7.2020. What I see as my options is (in order from less expensive to the most expensive):
1. desolder digital decoders and replace with ones that support DVB-T2.
2. replacing main board of each TV with simmilar but that has DVB-T2 decoder and supports power supply and LCD panel.
3. install CI+ module that might add support of DVB-T2.
4. Buy two new TVs.
What options are possible and what would be replacement components in case 1 and 2? What CI+ module would work for the tash if option 3 is to be selected?
Thanks.
Kind regards,
Gabrijel