O
olesolo
Benutzer
- Registriert
- 11.12.2022
- Beiträge
- 2
- Punkte Reaktionen
- 0
- Wissensstand
- Blutiger Anfänger
Hi,
Wenn der Fernseher eingeschaltet ist, sehe ich ein Logo und dann einen normalen Bildschirm mit einem angezeigten Kanal. Nach 5-10 Sek. Bluescreen und dann Blackscreen.
Ich habe schon versucht eine Firmware TP Board 5.06 zu flashen. Es startet ok, aber nachdem der Ladebalken die Mitte erreicht hat, startet der Fernseher mit dem gleichen Problem neu.
Die Hintergrundbeleuchtung scheint gut zu funktionieren.
Wenn das Problem in der Hauptplatine liegt, kann ich dieselbe Platine verwenden, aber von den 32-Zoll- oder 47-Zoll-Modellen?
*******
Hi,
When TV is on I can see a logo then regular screen with a channel displayed. After 5-10 sec. blue screen and then black screen.
I already tried to flash a firmware TP board 5.06. It starts ok but after the loading bar reached the center TV reboots with the same problem.
It seems the backlight working fine.
If the problem is in the main board, can I use the same board but from the 32" or 47" models?
Wenn der Fernseher eingeschaltet ist, sehe ich ein Logo und dann einen normalen Bildschirm mit einem angezeigten Kanal. Nach 5-10 Sek. Bluescreen und dann Blackscreen.
Ich habe schon versucht eine Firmware TP Board 5.06 zu flashen. Es startet ok, aber nachdem der Ladebalken die Mitte erreicht hat, startet der Fernseher mit dem gleichen Problem neu.
Die Hintergrundbeleuchtung scheint gut zu funktionieren.
Wenn das Problem in der Hauptplatine liegt, kann ich dieselbe Platine verwenden, aber von den 32-Zoll- oder 47-Zoll-Modellen?
*******
Hi,
When TV is on I can see a logo then regular screen with a channel displayed. After 5-10 sec. blue screen and then black screen.
I already tried to flash a firmware TP board 5.06. It starts ok but after the loading bar reached the center TV reboots with the same problem.
It seems the backlight working fine.
If the problem is in the main board, can I use the same board but from the 32" or 47" models?
Zuletzt bearbeitet: